家庭用水行为综合模型研究

水资源管理部门正在面临应对干旱,人口增长和水资源减少,气候变化的预言而仍要保证有足够水供应满足需求的挑战。为了发展有效的家庭需求管理程序,水资源管理者需要了解可能影响家庭水源使用的因素。通过检查和再分析当前的水消费行为模型,我们提出了一个理解家庭水消费的新模型。我们对信任在居民水消费中所发挥的作用进行了讨论,因为如果人们感觉身边的人并没有最小化水的使用那么人们便不会自觉节约用水（人际间的信任）。除此之外,如果人们不信任水资源管理部门,那么人们也不太可能节约用水（对社会公共机构的信任）。本文提出了为完全理解确定居民用水行为所涉及的因素,需要对水消费中信任度的作用进行研究。     

北京市建筑节能现状与对策

建筑能耗在北京市能耗总量中是关键的一部分,推广节能建筑对于北京市的低碳发展具有重要意义。在当前北京市建筑节能工作中,采暖能耗是节能减排的重点,公共建筑能耗增加需要控制。在北京市低碳建筑推进工作中遇到了评测标准、检验方法的不完善,企业与个人的动力不足以及相关技术创新能力较低的障碍。针对这些问题,政府应从加强宣传与干预、建立低碳建筑标准规范和技术体系角度实施相应的应对措施,鼓励企业和个人选择低碳建筑,完善检测标准,健全技术创新体系,促进低碳建筑的推广。     

合肥高新区资源能源消耗回顾性评价研究

以合肥高新技术产业开发区为例,利用2003年-2008年的资源能源数据,通过回顾性评价研究方法,分析出新鲜水耗量是在正常消耗范围、单位工业增加值废水产生量低于国家标准值、综合能耗弹性系数呈下降趋势和控制SO2排放量的必要性等一系列问题,这对合肥高新区今后的发展将起到积极指导作用。     

多铵复合盐分离工艺热工优化研究

多铵复合盐分离方法是利用纯物理的方法对焦炉煤气进行处理并分离出相应的盐类,在冷却结晶的过程中,从提高物料终冷温度的角度,对该方法进行相应的节能分析。一方面可以为当前生产提供节能改造依据,另一方面可以为该方法在大规模生产中的应用提供理论依据。     

基于STIRPAT模型的能源消费碳足迹变化及影响因素——以江苏省苏锡常地区为例

定量研究经济社会发展对地区能源消费碳足迹的影响对区域实现低碳发展具有重要意义。论文计算了江苏省苏锡常地区1991-2008年能源消费碳足迹,采用岭回归函数对STIRPAT模型进行了拟合,采用脱钩指数分析了经济发展与能源消费碳足迹之间的关系。结果表明:①1991-2008年能源消费碳足迹平均增长速度为15.30%,能源消费碳足迹分配率以煤炭为主,石油所占比例呈波动下降趋势,天然气所占比例上升较快,能源消费碳足迹产值总体呈波动下降趋势;②经济增长是能源消费碳足迹的主要影响因素,两者关系模型拟合未出现环境库兹涅茨曲线;③经济增长与能源消费碳足迹之间处于相对脱钩与复钩的波动状态,从另一侧面验证了目前两者之间不存在库兹涅茨曲线假说的结论。     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

Assessment of eco-labelling criteria development from a strategic sustainability perspective

To turn current patterns of consumption and production in a sustainable direction, solid and understandable market information on the socio-ecological performance of products is needed. Eco-labelling programmes have an important role in this communication. The aim of this study is to investigate what gaps there may be in the current criteria development processes in relation to a strategic sustainability perspective and develop recommendations on how such presumptive gaps could be bridged. First a previously published generic framework for strategic sustainable development is described and applied for the assessment of two eco-labelling programmes. Data for the assessment is collected from literature and in semi-structured interviews and discussions with eco-labelling experts.The assessment revealed that the programmes lack both an operational definition of sustainability, and a statement of objectives to direct and drive the criteria development processes. Consequently they also lack guidelines for how product category criteria might gradually develop in any direction. The selected criteria mainly reflect the current reality based on a selection of negative impacts in ecosystems, but how this selection, or prioritization, is made is not clearly presented. Finally, there are no guidelines to ensure that the criteria developers represent a broad enough competence to embrace all essential sustainability aspects.In conclusion the results point at deficiencies in theory, process and practice of eco-labelling, which hampers cohesiveness, transparency and comprehension. And it hampers predictability, as producers get no support in foreseeing how coming revisions of criteria will develop. This represents a lost opportunity for strategic sustainable development. It is suggested that these problems could be avoided by informing the criteria development process by a framework for strategic sustainable development, based on backcasting from basic sustainability principles.     

空调系统冷冻水循环水泵变频运行的变温差控制

在分析空调系统变流量运行调节的基础上,提出了变温差控制并给出了控制方案。变温差控制过程不仅具有负反馈,而且具有正反馈,能较好的适应空调负荷的变化。比较分析了变温差控制、定温差控制、定压差控制的节能性,变温差控制的节能潜力最大,是一种最佳控制方式。